Post your part in, we recondition and return it.
Meksta Engine Reconditioning
Remanufactured
Remanufactured exchange engine Peugeot/Citroen 2.0 BlueHDi DW10, example image of the equivalent version

The engine is delivered as a long block on a pallet, packaged in our workshop.

DW10FDAHXAH01DW10FCDAHZ

Peugeot/Citroen DW10 engine, remanufactured exchange engine (2009-)

Remanufactured Peugeot/Citroen DW10 engine, long block. Fits among others Expert Skåp, Jumpy III Skåp, Traveller Buss. Goes through quality control in our workshop before delivery.

4 657,95 €incl. VAT

+ 777,95 € core deposit, refunded after an approved core return. How the exchange system works

12 month warranty with no mileage limit
Split your payment. Choose Klarna at checkout.
Delivered after orderDelivery time approx. 1 weekVerified against VIN

Delivered as a long block. Ancillaries such as the turbo, injectors, manifold and sump are not included, they are transferred from your old engine. See what's included

Shipping on a pallet from 1 099 SEK, pickup free of charge.

HOW THE PURCHASE WORKS
1Place order2We verify VIN3Engine finished4Quality control5Delivery
Until you receive delivery confirmation you can cancel free of charge.

Payment method when ordering:

KlarnaVisaMastercardBusiness invoice
12 month warranty with no mileage limitKvalitetskontrollerad i vår verkstadDeposit back once your old engine has been sent in and approvedPickup at our workshop south of Stockholm possible
4 657,95 €incl. VAT · + 777,95 € core deposit

What is included in the engine

The engine is delivered as a long block: a bare engine without the sump, turbo, injectors and EGR. The sump and ancillaries are transferred from your old engine during installation.

INCLUDED
New pistons (STD or oversize, always new)New piston ringsNew connecting rodsNew main bearingsNew connecting rod bearingsNew oil pumpNew seals (complete kit)New timing chainNew cylinder head gasketNew cylinder head boltsCylinder head: fully reconditioned with resurfacing, pressure testing, machined valve seats and new valve guidesValves: machined or replaced with new ones, always with new valve sealsCamshafts: checked, polished, replaced with new ones if neededEngine block: reconditioned with resurfacing of the sealing face, alignment check, cylinder inspection and honing (if needed, boring for oversize pistons and new honing)Crankshaft: original OE, checked and measured within tolerance, not reground12 month warranty with no mileage limitVIN verification before delivery
NOT INCLUDED, TRANSFERRED FROM YOUR OLD ENGINE
Oil panTurboInjectorsEGRAncillaries such as manifolds, alternator, starter motor and AC compressor
Your workshop transfers the parts during installation. Check the turbo and injectors before they are reused, it is a condition of the warranty.

Remanufactured exchange engine

RemanufacturedFully remanufactured according to the remanufacturing scope on the product page: new wear parts throughout, and for some engine codes a new cylinder head too. What is included is stated in plain text for every engine where we have the scope determined, for the rest we state it at the VIN verification.

Inspection before delivery

Every engine goes through quality control in our workshop: we check the engine, the packaging and the documentation. You get an engine that has been through our hands.

The engine is quality assured to Meksta's standard before delivery.

The remanufacturing scope is stated in plain text per engine code.

Technical data

Engine codeDW10FD, AHX, AH01, DW10FCD, AHZ, DW10FUD, AHY, AH03, DW10FUC, AHR, DW10FC, EHZ, DW10FDC, EHP, EHY, DW10FDU, EHT, EHX, DW10FE, AHV, EHSBrandPeugeot/CitroenFuelDieselCylinder volume2.0 literModel years2009-VersionLong block, without the sump and ancillariesScopeFully remanufactured with new wear parts

DW10 is available in several versions. The exact variant is confirmed against your VIN before delivery.

Fits these vehicles

The table shows vehicles where DW10 occur. The same engine code can exist in several versions, so treat the list as a probable match. Before delivery we always verify the exact engine version against your VIN.

Likely match: same engine code, version confirmed against VIN. Verified against VIN: version is always verified against your VIN before delivery.

ENGINEMODEL YEARPOWERMATCH
2.0 HDi 1302011-128 hpLikely match
2.0 HDi 130 4x42012-2016128 hpLikely match
2.0 BlueHDi 1802016-2025177 hpLikely match
2.0 BlueHDi 1202016-2022122 hpLikely match
Can't find your car in the list? Send a quote request and we will check, or search another engine code:

Good to know before you order

The right engine, guaranteed

The same engine code can exist in several versions, and the wrong version is an expensive mistake. That is why we verify the exact engine version against your VIN or reg number before delivery. You can order directly, we check your VIN after purchase, and delivery confirmation is sent once the version is confirmed. Until then you can cancel free of charge.

Core deposit: 777,95 €

Exchange engine means your old engine is handed over in exchange. The deposit is added at purchase and refunded in full once your old engine has reached us and been approved. The requirement is that the block is intact: no holes, no cracks, no broken-off pieces. If the block is damaged or incomplete we will contact you with photos and a decision before the deposit is finally handled, if the requirement is not met the deposit is not paid out. You arrange the transport of your old engine yourself and send it in within 30 days of delivery.

Delivered after order, delivery time approx. 1 week

Your engine is quality assured to Meksta's standard and goes through quality control in our workshop before delivery. Delivery time normally approx. 1 week from when your engine version is verified, up to 2 weeks during high workload, then delivery on a pallet or pickup at our workshop.

12 month warranty with no mileage limit

The warranty covers the engine itself: faults in material or workmanship that appear during the warranty period. Installation work, reused surrounding components and faults caused by incorrect installation are not covered. Read more about warranty and statutory rights

Questions about fitment, the deposit or the warranty? See the FAQ or get in touch on info@meksta.se.

Företag eller verkstad? Se villkor och fakturaköp för företagskunder.

More exchange engines

All brands
Remanufactured exchange engine 1.2 PureTech (e-THP, VTI), example image of the equivalent versionRemanufactured
M01HM05EB2+29Remanufactured exchange engine 1.2 PureTech (e-THP, VTI)Fits among others C3 III, 208 IDelivered after order, delivery time approx. 1 week
3 513,95 €+ core deposit 777,95 €
Remanufactured exchange engine 1.5 BlueHDi, example image of the equivalent versionRemanufactured
DV5RDYHYYH01+13Remanufactured exchange engine 1.5 BlueHDiFits among others Partner Skåp/stor limousine, Berlingo Skåp/stor limousineDelivered after order, delivery time approx. 1 week
4 062,95 €+ core deposit 777,95 €
Remanufactured exchange engine 1.6 BlueHDi, example image of the equivalent versionRemanufactured
DV6FEBHWBH02+9Remanufactured exchange engine 1.6 BlueHDiFits among others Berlingo Skåp/stor limousine, Partner Skåp/stor limousineDelivered after order, delivery time approx. 1 week
3 285,95 €+ core deposit 777,95 €
Guide: How the exchange system worksTechnical info about engine types