Remanufactured

The engine is delivered as a long block on a pallet, packed in our workshop in Tyresö.

F1CE0481F1CE3481

Remanufactured exchange engine Fiat/Iveco 3.0 JTD (Euro 4/5)

Name: Remanufactured exchange engine Fiat/Iveco 3.0 JTD (Euro 4/5)
Brand: Fiat/Iveco
SKU: reman-056
Price: 59400 SEK
Availability: InStock

Remanufactured exchange engine, long block. Fits among others Daily IV Flak/chassi, Daily IV Skåp, Daily III Skåp. Built to order and quality checked in our workshop in Tyresö.

59 400 krincl. VAT

+ 10 000 kr core deposit, refunded after an approved core return. How the exchange system works

12 month warranty with no mileage limit, incl. installation warranty

Built to orderBuild time approx. 1 weekVerified against VIN

Delivered as a long block. Ancillaries such as the turbo, injectors, manifold and sump are not included, they are transferred from your old engine. See what's included

HOW THE PURCHASE WORKS

1Place order2We verify VIN3The build starts4Final inspection5Delivery

Until the build starts you can cancel free of charge.

Payment method when ordering:

Business invoice

12 month warranty with no mileage limit, incl. installation warrantyQuality checked in our workshopDeposit back once your old engine has been sent in and approvedPickup available in Tyresö

59 400 krincl. VAT · + 10 000 kr core deposit

What is included in the engine

The engine is delivered as a long block: a bare engine without the sump, turbo, injectors and EGR. The sump and ancillaries are transferred from your old engine during installation. Timing drive and gears according to the engine family's specification, see the list below.

INCLUDED

New camshaft cover (camshaft module)New valvesNew pistons (STD or oversize, always new)New piston ringsNew connecting rodsNew main bearingsNew connecting rod bearingsNew oil pumpNew seals (complete kit)New complete timing drive kitNew cylinder head gasketNew cylinder head boltsNew crankshaftCylinder head: fully reconditionedCamshafts: checked, polished, replaced with new ones if neededEngine block: reconditioned with resurfacing of the sealing face, alignment check, cylinder inspection and honing (if needed, boring for oversize pistons and new honing)12 month warranty with no mileage limitVIN verification before the build starts

NOT INCLUDED, TRANSFERRED FROM YOUR OLD ENGINE

Sump, the sump is transferred during installationTurboInjectorsEGRAncillaries such as manifolds, alternator, starter motor and AC compressor

Your workshop transfers the parts during installation. Check the turbo and injectors before they are reused, it is a condition of the warranty.

Remanufactured exchange engine

RemanufacturedFully remanufactured according to the remanufacturing scope on the product page: new wear parts throughout, and for some engine codes a new cylinder head too. What is included is always stated in plain text.

Final inspection

Every engine goes through a final inspection in our workshop in Tyresö: we check the engine, the packaging and the documentation. You get an engine that has been through our hands.

The engine is built to order and quality assured to Meksta's standard.

The remanufacturing scope is stated in plain text per engine code.

Technical data

Engine codeF1CE0481, F1CE3481BrandFiat/IvecoFuelDieselCylinder volume3.0 literVersionLong block, without the sump and ancillariesScopeAlmost all components new, including a new cylinder head

F1 is available in several versions. The exact variant is confirmed against your VIN before the build starts.

Fits these vehicles

The table shows vehicles where F1 appears. The same engine code can exist in several versions, so treat the list as a likely match. Before the build starts we always verify the exact engine version against your VIN.

Verified against VINThe list is based on the engine family's members and is always verified against your VIN.

ENGINE	MODEL YEAR	POWER	MATCH
50C15	2006-2011	146 hp	Verified against VIN
35C15	2006-2011	146 hp	Verified against VIN
40C15	2006-2011	146 hp	Verified against VIN
45C15	2006-2011	146 hp	Verified against VIN

Can't find your car in the list? Send a quote request and we will check, or search another engine code:

Good to know before you order

The right engine, guaranteed

The same engine code can exist in several versions, and the wrong version is an expensive mistake. That is why we verify the exact engine version against your VIN or reg number before the build starts. You can order directly, we check your VIN after purchase and the build only starts once the version is confirmed. Until then you can cancel free of charge.

Core deposit: 10 000 kr

Exchange engine means your old engine is handed over in exchange. The deposit is added at purchase and refunded in full once your old engine has reached us and been approved. The requirement is that the block is intact: no holes, no cracks, no broken-off pieces. You arrange the transport of your old engine yourself and send it in within 30 days of delivery.

Built to order, build time approx. 1 week

We do not pretend to have stock. Your engine is built to order, quality assured to Meksta's standard and goes through a final inspection in Tyresö. Build time normally approx. 1 week from when your engine version is verified, up to 2 weeks during high workload, then delivery on a pallet or pickup with us in Tyresö.

12 month warranty with no mileage limit

The warranty covers the engine and includes an installation warranty: if a warranty fault is confirmed on the engine, the installation work is also compensated under the warranty terms. Faults caused by incorrect installation or by reused ancillary components are not covered. Read more about warranty and statutory rights

Questions about fitment, the deposit or the warranty? See the FAQ or get in touch on info@meksta.se.